Home > News > PRAXIS – National Architecture Conference Day One

PRAXIS – National Architecture Conference Day One

national-conference_Hero_banner

To say the National Conference is a busy time for architects would be an understatement. The excitement kicked off on Thursday with a number of events including Parlour’s Participate, followed by the opening party drinks at The Argyle which left a few heads dusty on Friday morning. The next two days are filled from 9am to 5:30pm with a list of national and international architects talking about Praxis and their process, propositions and productions. Throw in a few fringe events like the tours and breakfasts and it makes for a packed weekend. 

Thank you for reading this post, don't forget to subscribe!

When I arrive on Friday morning, the ICC is buzzing and long lines of people snake from the registration desk, while waiting to receive the usual conference lanyards. Upstairs the usual conference coffee (though admittedly dispensed but a much fancier looking espresso machine) dulls the senses and many architects, like myself, are sitting on the floor, propped against the large exposed concrete columns tapping away on laptops, making phone calls and even CAD-ing. It speaks volumes to the hours expected of an architect, that even now at the National Conference, a time to network and connect with other architects, work still demands their time. 

As the starting bell chimes, the veritable sea of black clothing (spotted here and there with more vibrant outfits) wades through the doors and into the conference welcome and introduction in the theatre. This is the first time the conference has been held in the new ICC building, and architects stop to inspect the ply acoustic panels and carpet along the way before settling into their seats.

The conference is opened by Gadigal Elder, Uncle Chicka Madden, who welcomes everyone to the Eora Nation, and followed by National President, Ken Maher for the official opening. Ken highlights the major dangers facing architecture including affordable, equitable housing and climate change, whilst encouraging the crowd to retain their unique identities as architects. Jennifer Cunich, the CEO of the Australian Institute of Architects, then takes the stage to talk about changes happening in the institute. Ken Maher returns to the stage to discuss the conference program with Helen Lochhead, the Dean of the Built Environment at the University of New South Wales. 

Following the typical opening, the enthusiastic and eccentric Winy Maas, of MVRDV fame, creates a feeling of excitement in the room. Filling us with fantastical ideas of extroverted skyscrapers and evolutionary cities. His own take on the Rem Koolhaus S-M-L-XL stretches down to XXS, covering a number of projects from a unified globe sharing resources, activating rooftops for new villages, and a plasma skin which adapts to the user to create environments. As the bell chimes Winy, doesn’t slow and continues his engaging discussion to the very end, and creates invigorating discussion, whether you love his work or not.

After the morning tea break we enter the room again for shorter presentation from a number of Australian architects. They gather on the stage, sitting on individual couches as they are introduced. Megan Baynes, of Room 11, begins the discussion reminiscing on her time tidying in Tasmania before leaving the island, and like most Tasmanians, returned to her home. Her island BM (Before MONA) was a place of forestry, and afterwards transformed to a place of culture. Megan shows us a collection of the work completed by Room 11, the works have a horizontality with long low forms, striking red windows, silvered timber cladding and monolithic stone walls, all speaking of their place and the tensions which characterise the island.

Next Rachel Nolan and Patrick Kennedy take to the lectern, again talking of their beginnings studying at university in Melbourne together and spending nights drinking at the Robin Boyd designed bar around the corner. Their work is inspired by that which evokes memory and trying to design that which creates it: space, colour, form, texture, scale and scent. Their work abstracts form while exploring ideas of hearth and home, and the domestic ritual. They talk of the contrasts between the minimal and the unexpected, which is evident in their sculptural and often geometric form. These ideas are explored in their office, in an area fondly know as the Cage, creating debate and discussion beyond the partners to their staff as a whole.

In contrast to the previous speakers of the group, Rodney Eggleston, of March Studio, discusses a project which has never been completed. A competition entry for the National Gallery of Victoria’s summer pavilion, GAV is a technicolour dream which speaks of equality and reinterprets the traditional pavilion by reusing the structure from John Wardle’s previous summer pavilion.

After lunch we head back into the darkened room for the super session – a discussion of mega cities between experts hailing from India, Australia and the Netherlands. The differences in context make for interesting discourse as Rahul Mehrotra and Prathima Manohar discuss the challenges of sanitation and basic infrastructure in India, Julian Bolleter highlights the issues of Australia supporting large population growth, and Sylvia Karres expresses concern over the segregation of megacities. The debate is heated at times, but there is an agreement from all parties that infrastructure and public transport are the leading issues in providing affordable housing and access to jobs for an equitable mega city now and in the future.

Eva Castro, from Plasma Studio and GroundLab, follows the Super Session and begins her discussion with philosophical position behind much of their work. She is passionate, and speaks of her research as importantly as her architecture or landscape design, believing that the two feed on another. Plasma Studio’s first project, a small home, is an abstraction of space, loosening the meaning associated with certain forms to allow the owners to adapt their home to their different needs. It is this idea which is carried throughout the fractured aesthetic from small interior projects through to large community and educational masterplans, fusing landscape and architecture to create an integrated whole in each of their works.

Finally, the first day wraps up with Glenn Murcutt in discussion with Helen Lochhead. For those that have seen Glenn talk before, the renowned and loved Australian architect delivers no surprises. He talks of his childhood in Papua New Guinea and reading the details of the environment to avoid the cannibalistic natives, learning of architecture from his parent’s magazines, and learning the art of joinery in his father’s workshop. It was this passion for woodworking and boats, which made him believe houses should operate like a boat, ever-changing for the conditions at hand. As is always discussed with Glenn, questions arise regarding his practise and process – he only hand draws and works in a one man studio, collaborating with engineers he has known all their lives. When questioned on the sustainability of his practice Glenn, in his usual cantankerous but affable way, ends the day with a laugh, declaring, ‘I’m not over yet’.

 Written by: Alexandra McRobert (NSW Event Correspondent for AWS)

Alexandra is a PhD Candidate at the University of Sydney and practising architectural graduate. Her research and work focuses on delivering affordable housing and prefabricated manufacturing techniques. Alexandra has also been involved in number of volunteer projects overseas, and spends a considerable amount of her spare time contemplating red wine and board games

Recent News

Architectural Window Systems (AWS) is proud to sponsor the Murcutt Building Tours, a centrepiece of the inaugural Glenn Murcutt Architecture Foundation Symposium, to be held in Sydney from 11 – 13 September 2025.

Thank you for reading this post, don't forget to subscribe!

The Symposium, presented by the Murcutt Foundation, celebrates more than five decades of architectural practice by Glenn Murcutt AO, Australia’s most celebrated living architect. The program offers three days of tours, talks and events for architects, students and design professionals, culminating in a rare opportunity to engage directly with some of Murcutt’s most acclaimed works.

As part of its ongoing support for architectural excellence and sustainable, place-based design, AWS is sponsoring the Murcutt Building Tours on Thursday, 11 September, providing a rare, guided experience led by Murcutt himself through two iconic residential projects:

  • Nicholas House
  • Simpson Lee House

“I am so pleased that so many have taken the chance to see these two projects that were designed in such close collaboration with the clients at the time, and which have been so well loved and cared for over the many decades since. It is such a joy to share this work,” Glenn Murcutt AO.

“Glenn Murcutt’s works embody a profound sensitivity to landscape, climate and material — and they are best understood by being experienced firsthand,” said Angela Bevitt-Parr, National Marketing Manager at AWS. “AWS is proud to support this extraordinary opportunity for architects to deepen their understanding of Murcutt’s work and philosophy through direct engagement with these exceptional places.”

Beyond the tours, the Symposium will feature keynote addresses from Glenn Murcutt AO and Francis Kéré (fellow Pritzker Prize Laureate), the inaugural awarding of the Murcutt Pin, and a full day of talks exploring the themes that have informed Murcutt’s unique model of practice.

“Francis Kéré is one of the great humans, and a gifted architect who really shows architecture can make a difference in people’s lives. I have a huge amount of respect and time and a wonderful friendship with this man because of his integrity. I am so pleased that Sydney will get to meet him this year,” Glenn Murcutt AO.

For full event details and to register, visit: https://events.humanitix.com/murcutt-symposium

About the Glenn Murcutt Architecture Foundation: The Glenn Murcutt Architecture Foundation promotes the work and legacy of Glenn Murcutt AO through education, advocacy and public programs that advance environmentally responsible architecture and foster dialogue around design excellence and connection to place. For more information visit https://www.murcuttfoundation.org/

Image credit:

Simpson Lee house: Anthony Browell.

 

In late 1994, two dedicated fenestration professionals, Gavan Pead and David McCleary, took a pivotal tour of Architectural Profiles Ltd (APL) in Cambridge, New Zealand. Inspired by APL’s customer-focused business model, they envisioned bringing a similar approach to challenge the Australian market’s basic, outdated aluminium windows and doors that dominated at that time.

Thank you for reading this post, don't forget to subscribe!

This vision led to the founding of Architectural Window Systems (AWS) in January 1995, with Pead as the first General Manager and McCleary as Head of Design. AWS launched with the release of the 502 sliding window and 541 sliding door – affordable, single-glazed products that immediately stirred the market. “In those days, profiles were hand-drawn, and every detail required precise verification,” McCleary recalls. Their commitment to quality was matched by strong supplier support, relationships that remain solid today.

To bring this customer-centric model to life, AWS built a robust network of independent fabricators across Australia, now exceeding 200, with unparalleled reach and service capabilities. Steve Butcher of Great Lakes Glass, an early adopter, recalls that “their passion was infectious, and if they were starting something new, I wanted to be part of it.”

AWS quickly became a trusted name in high-performance aluminium windows, with products designed to meet the needs of architects, designers, builders, and homeowners. With the launch of ThermalHEART™ in 2007, followed by ThermalHEART™ commercial in 2012, AWS introduced its first thermally broken products, raising the bar for energy efficiency. In 2003, David’s son, Mark McCleary, joined AWS, continuing the family’s involvement in the company. In 2021, Mark took over the leadership of research and design, guiding the development of innovative window and door solutions. That same year, AWS introduced ComfortEDGE™, a significant step forward in thermal efficiency. With additional ComfortEDGE™ products set for release in 2025, AWS continues to strengthen its commitment to energy-efficient solutions for the Australian market.

Reflecting on the success of the last 30 years, AWS General Manager Greg Taylor notes that “it’s our model that differentiates us. A supplier that is not only an extrusion supplier, but a reliable, supportive, engaged business partner that understands the need for continuous improvement”.

In 2025, AWS will continue to focus on improvement, introducing a class-leading digital environment for specifiers, fabricators, and staff, along with an automated workflow connectivity solution exclusively for AWS fabricators.

For more information, contact marketing@awsaustralia.com.au

From roof colour to insulation, from appliances to landscaping, all the material selections made in a project form a part of the build’s overall sustainability.

Thank you for reading this post, don't forget to subscribe!

Architects and Building Designers are tasked with the most important objectives; managing client expectations, design intent, – and of course budget all within site parameters and building compliance.

When it comes to achieving or exceeding a 7-star energy rating as part of the National Construction Code, few of these choices offer as much scope for variation and flexibility as the selection and application of window and door systems as a major component of the thermal envelope of the building.

Well specified windows and doors can be the difference between a thermally efficient design which comes in on budget versus an over engineered, high performing build that can confuse the most experienced specifier and possibly exceed budget – perhaps unnecessarily.

Thermally broken windows have long held the title of one of the most energy efficient solutions by offering the broadest application for use. By insulating the pathway for thermal transmission through the window frame, it’s a clever way to make the most from the durability of aluminium while reducing its conductivity – but extra components inevitably mean more assembly and a comparatively higher price tag.

So, is there a cost-efficient way to maximise energy gains, while maintaining strength and design flexibility without turning to thermally broken windows?

That’s a question both asked and answered by leading supplier of aluminium windows and doors, AWS (Architectural Window Systems). This fundamental question was asked over 10 years ago and it led to the development of a more cost effective, energy efficient solution which also offers a contemporary design aesthetic in the current market.

Cue ComfortEDGE™

ComfortEDGE is an elegant, double-glazed solution for residential applications that rivals the energy efficiency of thermally broken products. Its embedded frames provide a sleek design comprising fewer components than thermally broken counterparts, making it a cost-effective, wholly Australian made option for Australian projects. ComfortEDGE recognises that clever design doesn’t have to be complicated, and skilfully minimises the amount of exposed frame by embedding into the timber reveal, insulating against the environment to improve energy efficiency and thermal comfort.

ComfortEDGE truly is the perfect meeting point of form and functionality. It’s stylish and high performing, with U Values as low as 1.9 – placing you in the best position to meet 7-star energy provisions while keeping your budgeton track.

Back to weighing up your options… How will you know if ComfortEDGE is right for your project?

AWS recommends consulting your specification expert early in the design process, taking a holistic approach to build sustainably and to meet energy compliance on budget. For designers looking to harness the vast possibilities afforded by Australian designed and manufactured architectural windows, give your AWS specifier team member a call and reap the rewards. (AWS 1300 026 189)