Home > News > Rediscovering Roots, Culture and Land

Rediscovering Roots, Culture and Land

pittwater_hero_banner

Student Architect, Sahibajot Kaur, attended the 2016 Total Immersion Student Architecture Summer School by Ozetecture, from the 14th to the 20th of February

Thank you for reading this post, don't forget to subscribe!

Architecture is often confused with building. So I realised, after spending seven days with two of Australia’s national gems.

Building shelters life; architecture inspires life. I couldn’t help but agree in totality to this notion put forward by Richard Leplastrier and Peter Stutchbury after dinner on the very first night, as we sat in the summer air – 32 of us – starry-eyed and wonderstruck to be in the presence of such influential yet humble cultural creatives. 

The youth hostel held us snug in its verandah, floating on timber stilts upon a terraced landscape that stepped down to the water’s edge on one side, and up to a ridge on the other, only to plateau for a short while and then step back down to the water again. Nestled into this headland, we shared laughs, visions and stories, gazing at the stars, land and water beyond.

We had spent the afternoon ‘on the Pittwater’, getting to know the context of the place we were to spend the rest of the week. Our eyes soaked in unending views of land and sea, and the meeting of the two at sandy shorelines and eroded rock-faces, while our skin absorbed the unrelenting, yet empowering sunshine that made the day as spectacular as it was. Our pens were busy trying to capture what we observed – the yachts, jetties and structures that speckled the landscape.

Architecture is not about fancy academic constructs; it is about wellbeing.” A sensation of calm and ease swept over me. These ideas made me feel right at home. They embodied the values I felt most strongly about, and showed me that Architecture could be – and should be – a vehicle to carry these ideals forth. I still remember thinking, “this is what I want to do”.

There was immense comfort within that moment, knowing that ideals and skill – the metaphysical and the physical – could be married. Going through university, it was almost always about being the ‘best’ – or so it seemed. I could never wrap my head around the notion of ‘best’. What did it mean, and in a space as subjective as design, who defined it? But here and now – slung between the earth and the sky – I realised that if Architecture is about improving lives and about wellbeing, then there is no question of ‘competition’.

Every piece of land possesses its own unique characteristics, and hence, calls for its own unique construction methods and spatial qualities. We looked out at all the houses that sat on the edges of the bay. As Peter explained the immense differences between two of his works which were situated only 2km away from each other, his concern about the growing ‘international style’ of Architecture began to make sense. Why is it that all our architecture is starting to look the same? Why should architecture be detached from place?

 —

“Draw.” That was our instruction on how to start each day at Camp.  “Go down to Woody Point before the sun rises, and draw”. To our surprise, Woody Point – with its cathedral of trees and filtered view out over the bay – gave us new drawings every day. Charcoal very quickly became my favourite drawing medium. Drawing reveals things that we miss when we simply look – it helps us read the landscape. And without reading the landscape, how can we possibly respond to it?

Our elders had their own ways of reading the landscape. They knew it like the back of their hand. And spending just a week trekking through the bush, canoeing on the water, drawing with tree-bark, talking about the land and the way our elders navigated it, and working with each other to draw, design and construct ideas under the sun, analysing our site in the flesh and not on a screen, made me feel more connected to the land than ever before. It made me wonder why, in my three years of architectural education, I had never done this before – why, in my three years of architectural education, I had never been challenged to consider what it means to be truly ‘sustainable’ and how Architecture can help humanity.

Humanity – that’s what Architecture should be about, and that’s what this camp made me realise. There are social issues that need to be solved, and our Architecture must not shy away from providing parts of the answers.

 —

Forget shiny materials and fancy forms. Forget about trying to build the world’s tallest towers and most luxurious resorts. Forget about competing to be the best. Let’s all revel in each other’s design excellence and brilliance and work together to work with, and respect, the land and its people, and see, not how much, but how little can live with. Like nature so eloquently and beautifully takes care of us all and sustains itself with its ingenious forms and seamless systems, let’s make architecture and not just buildings.

Written by: Sahibajot Kaur of Plus Architecture (New South Wales Event Correspondent for AWS)

Sahibajot Kaur is a Graduate Architect at Plus Architecture, who recently graduated from the Bachelor of Design in Architecture from the University of Sydney.  As a big believer in the values of humanitarianism, she is interested in site-responsive, socially-uplifting and sustainable architecture.  She is constantly questioning what is means ‘to live’, and how architecture can truly help people while being as simple as possible. Sahibajot currently blogs about her learning and ideas, and envisions herself as an advocate of responsible, sensitive and passive design in practice and in dialogue. 

Recent News

Architectural Window Systems (AWS) is proud to sponsor the Murcutt Building Tours, a centrepiece of the inaugural Glenn Murcutt Architecture Foundation Symposium, to be held in Sydney from 11 – 13 September 2025.

Thank you for reading this post, don't forget to subscribe!

The Symposium, presented by the Murcutt Foundation, celebrates more than five decades of architectural practice by Glenn Murcutt AO, Australia’s most celebrated living architect. The program offers three days of tours, talks and events for architects, students and design professionals, culminating in a rare opportunity to engage directly with some of Murcutt’s most acclaimed works.

As part of its ongoing support for architectural excellence and sustainable, place-based design, AWS is sponsoring the Murcutt Building Tours on Thursday, 11 September, providing a rare, guided experience led by Murcutt himself through two iconic residential projects:

  • Nicholas House
  • Simpson Lee House

“I am so pleased that so many have taken the chance to see these two projects that were designed in such close collaboration with the clients at the time, and which have been so well loved and cared for over the many decades since. It is such a joy to share this work,” Glenn Murcutt AO.

“Glenn Murcutt’s works embody a profound sensitivity to landscape, climate and material — and they are best understood by being experienced firsthand,” said Angela Bevitt-Parr, National Marketing Manager at AWS. “AWS is proud to support this extraordinary opportunity for architects to deepen their understanding of Murcutt’s work and philosophy through direct engagement with these exceptional places.”

Beyond the tours, the Symposium will feature keynote addresses from Glenn Murcutt AO and Francis Kéré (fellow Pritzker Prize Laureate), the inaugural awarding of the Murcutt Pin, and a full day of talks exploring the themes that have informed Murcutt’s unique model of practice.

“Francis Kéré is one of the great humans, and a gifted architect who really shows architecture can make a difference in people’s lives. I have a huge amount of respect and time and a wonderful friendship with this man because of his integrity. I am so pleased that Sydney will get to meet him this year,” Glenn Murcutt AO.

For full event details and to register, visit: https://events.humanitix.com/murcutt-symposium

About the Glenn Murcutt Architecture Foundation: The Glenn Murcutt Architecture Foundation promotes the work and legacy of Glenn Murcutt AO through education, advocacy and public programs that advance environmentally responsible architecture and foster dialogue around design excellence and connection to place. For more information visit https://www.murcuttfoundation.org/

Image credit:

Simpson Lee house: Anthony Browell.

 

In late 1994, two dedicated fenestration professionals, Gavan Pead and David McCleary, took a pivotal tour of Architectural Profiles Ltd (APL) in Cambridge, New Zealand. Inspired by APL’s customer-focused business model, they envisioned bringing a similar approach to challenge the Australian market’s basic, outdated aluminium windows and doors that dominated at that time.

Thank you for reading this post, don't forget to subscribe!

This vision led to the founding of Architectural Window Systems (AWS) in January 1995, with Pead as the first General Manager and McCleary as Head of Design. AWS launched with the release of the 502 sliding window and 541 sliding door – affordable, single-glazed products that immediately stirred the market. “In those days, profiles were hand-drawn, and every detail required precise verification,” McCleary recalls. Their commitment to quality was matched by strong supplier support, relationships that remain solid today.

To bring this customer-centric model to life, AWS built a robust network of independent fabricators across Australia, now exceeding 200, with unparalleled reach and service capabilities. Steve Butcher of Great Lakes Glass, an early adopter, recalls that “their passion was infectious, and if they were starting something new, I wanted to be part of it.”

AWS quickly became a trusted name in high-performance aluminium windows, with products designed to meet the needs of architects, designers, builders, and homeowners. With the launch of ThermalHEART™ in 2007, followed by ThermalHEART™ commercial in 2012, AWS introduced its first thermally broken products, raising the bar for energy efficiency. In 2003, David’s son, Mark McCleary, joined AWS, continuing the family’s involvement in the company. In 2021, Mark took over the leadership of research and design, guiding the development of innovative window and door solutions. That same year, AWS introduced ComfortEDGE™, a significant step forward in thermal efficiency. With additional ComfortEDGE™ products set for release in 2025, AWS continues to strengthen its commitment to energy-efficient solutions for the Australian market.

Reflecting on the success of the last 30 years, AWS General Manager Greg Taylor notes that “it’s our model that differentiates us. A supplier that is not only an extrusion supplier, but a reliable, supportive, engaged business partner that understands the need for continuous improvement”.

In 2025, AWS will continue to focus on improvement, introducing a class-leading digital environment for specifiers, fabricators, and staff, along with an automated workflow connectivity solution exclusively for AWS fabricators.

For more information, contact marketing@awsaustralia.com.au

From roof colour to insulation, from appliances to landscaping, all the material selections made in a project form a part of the build’s overall sustainability.

Thank you for reading this post, don't forget to subscribe!

Architects and Building Designers are tasked with the most important objectives; managing client expectations, design intent, – and of course budget all within site parameters and building compliance.

When it comes to achieving or exceeding a 7-star energy rating as part of the National Construction Code, few of these choices offer as much scope for variation and flexibility as the selection and application of window and door systems as a major component of the thermal envelope of the building.

Well specified windows and doors can be the difference between a thermally efficient design which comes in on budget versus an over engineered, high performing build that can confuse the most experienced specifier and possibly exceed budget – perhaps unnecessarily.

Thermally broken windows have long held the title of one of the most energy efficient solutions by offering the broadest application for use. By insulating the pathway for thermal transmission through the window frame, it’s a clever way to make the most from the durability of aluminium while reducing its conductivity – but extra components inevitably mean more assembly and a comparatively higher price tag.

So, is there a cost-efficient way to maximise energy gains, while maintaining strength and design flexibility without turning to thermally broken windows?

That’s a question both asked and answered by leading supplier of aluminium windows and doors, AWS (Architectural Window Systems). This fundamental question was asked over 10 years ago and it led to the development of a more cost effective, energy efficient solution which also offers a contemporary design aesthetic in the current market.

Cue ComfortEDGE™

ComfortEDGE is an elegant, double-glazed solution for residential applications that rivals the energy efficiency of thermally broken products. Its embedded frames provide a sleek design comprising fewer components than thermally broken counterparts, making it a cost-effective, wholly Australian made option for Australian projects. ComfortEDGE recognises that clever design doesn’t have to be complicated, and skilfully minimises the amount of exposed frame by embedding into the timber reveal, insulating against the environment to improve energy efficiency and thermal comfort.

ComfortEDGE truly is the perfect meeting point of form and functionality. It’s stylish and high performing, with U Values as low as 1.9 – placing you in the best position to meet 7-star energy provisions while keeping your budgeton track.

Back to weighing up your options… How will you know if ComfortEDGE is right for your project?

AWS recommends consulting your specification expert early in the design process, taking a holistic approach to build sustainably and to meet energy compliance on budget. For designers looking to harness the vast possibilities afforded by Australian designed and manufactured architectural windows, give your AWS specifier team member a call and reap the rewards. (AWS 1300 026 189)